The Maxibright CFL Reflector is a wide angle single parabolic reflector. It is a high polish, heavy duty aluminium reflector insert with rounded corners and heavy duty lamp holder spine. The heavy duty spine prevents CFL lamps sagging in the reflector keeping them in place for optimum light reflection.

Heavy duty wide angle parabolic

Optimised light dispersal

High polish aluminium

Heavy duty spine holds lamp firm & level

Ready to use with 5m power cable

BS 1363 13A plug

Maximum power 400W

Maxibright Dual Spectrum 600W HPS Lamp

 Maxibright Dual Spectrum 600W HPS Lamp provides 10% more light to your plants than standards hps lamps, suitable for all growth phases.

DAYLIGHT 60W 40% UVA 60% UVB LED

This UVA and UVB DAYLIGHT LED bar is a slim-line, stand-alone unit, which can also be installed as a supplemental light to an existing LED fixture. It will help to fine-tune the spectrum of any set up.

Light Radiation: 6600mW

(UVA: 6200mW UVB: 400mW)

Attach to DAYLIGHT LED lighting fixtures (480W/660W) or use independently

5000 hour lifespan

Internal LED driver: Plug and Play

Ideal as supplementary lighting

IP65 Ingress Protection

MAXIBRIGHT SUPER GROW METAL HALIDE 600W

Maxibright 600W Super Grow Halide 600W - The light produced by a Metal Halide lamp is on the end of the blue spectrum, which is high-intensity lamps, makes them the ideal lamps to use for the vegetative growth stage.

KEY VALUES:

Produces a wide spectrum with more blues than a HPS lamp.

Helps keep internodes short, producing stocky, bushy plants during the veg stage.

Produces a small amount of UVB

Fully compatible with magnetic and digital ballasts

Photosynthetic photon flux (PPF) 773umol/s

Closed-end 315W CMH Reflector

The DAYLIGHT Focus Reflector is designed to concentrate the majority of light from your lamp directly down on to the target canopy area, perfect for square growing areas such as a typical indoor grow tent. Available in remote or connect versions, they make a great choice for grow rooms dedicated to Ceramic Metal Halide technology.

Features

Closed-end reflector made from 98% reflective Miro-Aluminium. Available in remote or connect version for versatile power pack placement. Balanced hanging hooks for easy installation.

Benefits

Ideal for growing over square growing spaces E.G indoor grow tents. Perfect for dedicated Ceramic Metal Halide Grow rooms. Produces an exceptionally uniform Light on Target.

Specifications

Weight: Remote 2.1Kg max. Connect total weight 5Kg max.

Dimensions: 300mm x 300mm x 110mm

Maxibright Daylight Kits Powered by the Maxibright Daylight 315W power pack the Focus Remote & Focus Connect reflectors are compact, highly reflective and suitable for use as standalone lighting or to supplement other lighting. The Daylight 315 power pack fixes simply to the Focus Connect utilising two fixing points. Plug the shortened IEC connectors together and it’s ready to use; a true plug & play product. The Focus Remote can be used as a standard reflector with the ballast wall mounted. The coverage of both reflectors is ideally 1.0m² Available with 4k and 3k CDM bulb.

Maxibright Horizon Connect next generation 315v lighting The Horizon connect reflector, first thing you’ll notice is unique shape/size as its measures just 260mm x 210mm x 115m. Its purpose is to be used as supplementary lighting as its wide angle throws the light out, rather than down. Although it can cover a room size of 1.2m x 2.4m, to get the most out of this space.

Maxibright Horizon Remote 315w lighting shade The Maxibright Horizon Reflector is part of the next generation of lighting designed to help you get the very best from your CDM light. Excellent build quality and rigorous testing as standard you can be sure your plants will lap up every last usable lumen.

Maxibright 315 Twin Reflector twin 315w lighting shade Maxibright Daylight Twin Reflector is designed specifically for 315W CDM/CMH lamps so that the arc tubes are positioned to ensure the most efficient spread of light over a 1.5 x 1.5m area. Dimensions (mm): 640 (L) x 440 (W) x 135 (H)

Maxibright Daylight V3 maximum light intensity Maxibright Daylight Single Reflector V3 has a 315W PGZ18 Lamp Holder included. This third generation Daylight reflector offers improved light coverage. Dimensions (mm): 490 (L) x 440 (W) x 220 (H)

Maxibright Daylight 315w Digital Ballast low frequency square-wave power pack The Daylight 315 digital power pack for horticultural lighting from Maxibright is compact, lightweight and silent running. With all the features of the Maxibright Digilight range, this stunning power pack precisely drives 315W CDM/CMH lamps. The Daylight 315 when used with the 315W CDM/CMH lamps ensures healthy abundant yields, excellent PAR output levels per watts of power consumed. • Specifically designed to run Maxibright & Philips 315W CDM/CMH lamps correctly • Low frequency square-wave power pack • Small, lightweight & silent running • Soft start technology • End of lamp life detection • Dynamic frequency control • Short circuit protection • Thermal protection

More useful light output to your plants with the same power input

Maxibright Daylight LED 1030W (2369) 2.3μmol/J

DAYLIGHT 1030W LED PRO

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 1030W LED PRO. These fixtures boast a full spectrum of light with a fixture efficiency of 2.7 μmol/J and total output (PPF) of 2781 μmol/s

Featuring 10 x LED clip-on bars, and packed with all of the features of the datlight 660W LED PRO fixture, including remote dimming, iLink compatibility, high-efficiency diodes, and silent operation.

Overall fixture efficiency: 2.7 μmol/J

Total output: 2781 μmol/s

LUMLED white (2.85 μmol/J) and Osram red (3.8 μmol/J) chips: The best of the best.

10 bar system – Gives highly uniform coverage (PPFD) across the canopy. Ideal for areas up to 1.8m x 1.8m

Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

Silent running: No fans or moving parts.

Remote dimmer included: 25%-50%-75%-100% power.

DAYLIGHT 200W LED

The Maxibright Daylight 200W LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.

Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 200W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.

DAYLIGHT 200W LED PRO

The DAYLIGHT 200W LED PRO is perfect for those looking for a powerful yet incredibly compact LED grow light. A direct upgrade on our original unit, the PRO features an impressive total output of 500 μmol/s. Boasting a range of new features including a remote dimmer, IP65 rating (meaning the environment in your grow room poses less threat to the lifespan), and DAYLIGHT Lighting Controller compatibility, giving you even more control over your grow room environment.

Designed to cover a 0.8 x 0.8m perfectly, coupled with the ability to dim the unit’s full spectrum light output, which includes Far-Red, makes the DAYLIGHT 200W PRO a highly applicable unit from propagation through to flowering.

With no fans or moving parts, silent operation, and little heat output you’ll get the absolute most out of the smallest of growing areas.

Product Dimensions: 508 x 508 x 86mm

DAYLIGHT 300W LED

The Maxibright Daylight 300w LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.

Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 300W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.

DAYLIGHT 300W LED PRO

Introducing our latest addition to the DAYLIGHT LED range, the DAYLIGHT 300W LED PRO. These fixtures boast a full spectrum of light with a total output (PPF) of 750 μmol/s

This unit comes with IP65 rating as standard, meaning the environment within your grow room poses less threat to the lifespan of your light. Also having the ability to control multiple units via iLink cables or the DAYLIGHT Lighting Controller means you can tailor your lighting needs specifically to your plant, including Sunrise & Sunset settings. All this coupled with no fans or moving parts for silent operation, and very low heat output, makes the DAYLIGHT 300W PRO the most practical option for any small-scale grow room.

Total output (PPF): 750 μmol/s

Passive heat dissipation design (No need for internal cooling fans).

No LED covers: Clear glue diode protection for maximum output and efficiency

Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

Light distribution optimised for a 1 x 1m area.

Remote dimmer included: 25%-50%-75%-100% power.