Maxibright 315 Twin Reflector twin 315w lighting shade Maxibright Daylight Twin Reflector is designed specifically for 315W CDM/CMH lamps so that the arc tubes are positioned to ensure the most efficient spread of light over a 1.5 x 1.5m area. Dimensions (mm): 640 (L) x 440 (W) x 135 (H)

Maxibright Daylight V3 maximum light intensity Maxibright Daylight Single Reflector V3 has a 315W PGZ18 Lamp Holder included. This third generation Daylight reflector offers improved light coverage. Dimensions (mm): 490 (L) x 440 (W) x 220 (H)

Maxibright Daylight 315w Digital Ballast low frequency square-wave power pack The Daylight 315 digital power pack for horticultural lighting from Maxibright is compact, lightweight and silent running. With all the features of the Maxibright Digilight range, this stunning power pack precisely drives 315W CDM/CMH lamps. The Daylight 315 when used with the 315W CDM/CMH lamps ensures healthy abundant yields, excellent PAR output levels per watts of power consumed. • Specifically designed to run Maxibright & Philips 315W CDM/CMH lamps correctly • Low frequency square-wave power pack • Small, lightweight & silent running • Soft start technology • End of lamp life detection • Dynamic frequency control • Short circuit protection • Thermal protection

If you are unsure of whether you want to go for the Remote or Connect versions of the DAYLIGHT Horizon or Focus reflector, we have a simple solution for you. If you would rather keep the heat of your power packs outside of your growroom, or simply find it more visually pleasing that way, it couldn’t be easier to make the switch.

Make use of our 3 metre extension cable, when your grow room requires some distance between the power pack and reflector.

Maxibright Daylight Kits Powered by the Maxibright Daylight 315W power pack the Focus Remote & Focus Connect reflectors are compact, highly reflective and suitable for use as standalone lighting or to supplement other lighting. The Daylight 315 power pack fixes simply to the Focus Connect utilising two fixing points. Plug the shortened IEC connectors together and it’s ready to use; a true plug & play product. The Focus Remote can be used as a standard reflector with the ballast wall mounted. The coverage of both reflectors is ideally 1.0m² Available with 4k and 3k CDM bulb.

Entry Level 315W CMH Reflector

The DAYLIGHT Euro reflector from Maxibright has been tweaked and adapted to perfectly house the DAYLIGHT 315W CMH lamps. An ideal starting point for anyone considering venturing into full spectrum lighting, the DAYLIGHT Euro is an ideal cost effective introduction to CMH lighting

Benefits

Ideal introductory reflector for growing with CMH lighting.

Features

Open-ended reflector built from highly reflective, dimpled aluminium. Sturdy PGZ lamp holder.

Specifications

Dimensions: 280mm x 350mm x 120mm. Weight: 1kg

More useful light output to your plants with the same power input

Amazing CRI (97%), full spectrum and high output CMH lamp.

Ever wanted to switch over from HPS to using Ceramic Metal Halide lamps but found the kits cost too prohibitive? Now being compatible with magnetic AND digital power packs alike, the DAYLIGHT 600W 4K CMH lamps solve that problem for you. Providing a full spectrum of light with an impressive 1.6umol/J efficiency, these 4K Elite lamps are an ideal spectrum for the vegetative stages of growth, and can be integrated into any existing 600W lighting system with ease. Do your plants a favour and make the switch today.

Features

Full spectrum high PAR output (960 µmol/s), with the highest Colour Rendering Index of any DAYLIGHT lamp (97%).

Benefits

Energy efficient: high PAR output per Watt. Improved balanced spectrum with an enhanced blue region for outstanding vegetative growth.

Maxibright Daylight LED 1030W (2369) 2.3μmol/J

DAYLIGHT 1030W LED PRO

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 1030W LED PRO. These fixtures boast a full spectrum of light with a fixture efficiency of 2.7 μmol/J and total output (PPF) of 2781 μmol/s

Featuring 10 x LED clip-on bars, and packed with all of the features of the datlight 660W LED PRO fixture, including remote dimming, iLink compatibility, high-efficiency diodes, and silent operation.

Overall fixture efficiency: 2.7 μmol/J

Total output: 2781 μmol/s

LUMLED white (2.85 μmol/J) and Osram red (3.8 μmol/J) chips: The best of the best.

10 bar system – Gives highly uniform coverage (PPFD) across the canopy. Ideal for areas up to 1.8m x 1.8m

Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

Silent running: No fans or moving parts.

Remote dimmer included: 25%-50%-75%-100% power.

DAYLIGHT 1030W PRO from Maxibright

More Power. Advanced Design. New Spectrum.

The DAYLIGHT 1030W PRO is our most powerful and advanced full-spectrum fixture to date, designed for uncompromising performance in high-demand grow environments. With a blistering 3193 µmol/s total output and exceptional 3.1 µmol/J system efficiency, this unit delivers intense, even coverage across large canopy areas without hotspots or shadowing.

Featuring a 10-bar modular design with upgraded bar connections for improved stability, and passive cooling ensures silent, reliable operation throughout the grow cycle. Its full-spectrum output now includes added Far Red, offering a broader spectral range.

The onboard dimming control (25–100%) and remote options (20–100%) offer flexible lighting for all growth stages. IP65 water and dust resistance, an integrated driver, and compatibility with the DAYLIGHT LED Controller (sold separately) make this fixture both versatile and futureproof.

To fully unlock the fixture’s potential and maintain healthy photosynthesis at high intensities, we recommend using CO₂ supplementation in your grow space.

Trusted by professionals and designed for performance, the DAYLIGHT 1030W PRO delivers exceptional output, enhanced flowering potential, and the reliability commercial growers depend on.

Key Features

• High light output: 3193 μmol/s total output (PPF)

• High efficiency: 3.1 μmol/J efficiency (PPE)

• Uniform coverage: 10-bar modular system ensures even light distribution

• Optimised footprint: Ideal for grow spaces from 1.5 × 1.5 m up to 1.8 × 1.8 m

• Flexible dimming: Onboard (25/50/75/100%) or fine-tuned via controller (20–100%)

• Enhanced full spectrum: With added Far Red for stronger flowering response

• Premium diodes: LUMLED white and Osram red diodes for proven reliability

• Improved durability: Reworked bar connections for a stronger, more secure fit

• Built to last: IP65-rated for real grow room conditions

• Proven performance: Backed by in-house testing

• Product dimensions: 1067 mm (L) × 1120 mm (W) × 82 mm (H)

DAYLIGHT 200W LED

The Maxibright Daylight 200W LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.

Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 200W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.

DAYLIGHT 200W LED PRO

The DAYLIGHT 200W LED PRO is perfect for those looking for a powerful yet incredibly compact LED grow light. A direct upgrade on our original unit, the PRO features an impressive total output of 500 μmol/s. Boasting a range of new features including a remote dimmer, IP65 rating (meaning the environment in your grow room poses less threat to the lifespan), and DAYLIGHT Lighting Controller compatibility, giving you even more control over your grow room environment.

Designed to cover a 0.8 x 0.8m perfectly, coupled with the ability to dim the unit’s full spectrum light output, which includes Far-Red, makes the DAYLIGHT 200W PRO a highly applicable unit from propagation through to flowering.

With no fans or moving parts, silent operation, and little heat output you’ll get the absolute most out of the smallest of growing areas.

Product Dimensions: 508 x 508 x 86mm

DAYLIGHT 300W LED

The Maxibright Daylight 300w LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.

Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 300W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.

DAYLIGHT 300W LED PRO

Introducing our latest addition to the DAYLIGHT LED range, the DAYLIGHT 300W LED PRO. These fixtures boast a full spectrum of light with a total output (PPF) of 750 μmol/s

This unit comes with IP65 rating as standard, meaning the environment within your grow room poses less threat to the lifespan of your light. Also having the ability to control multiple units via iLink cables or the DAYLIGHT Lighting Controller means you can tailor your lighting needs specifically to your plant, including Sunrise & Sunset settings. All this coupled with no fans or moving parts for silent operation, and very low heat output, makes the DAYLIGHT 300W PRO the most practical option for any small-scale grow room.

Total output (PPF): 750 μmol/s

Passive heat dissipation design (No need for internal cooling fans).

No LED covers: Clear glue diode protection for maximum output and efficiency

Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

Light distribution optimised for a 1 x 1m area.

Remote dimmer included: 25%-50%-75%-100% power.

DAYLIGHT 480W LED

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED. These fixtures boldly bridge the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.

The DAYLIGHT 480W LED boasts a full spectrum of light with a fixture efficiency of 2.3 μmol/J and a total output of 1104 μmol/s. This is all made possible by 5 bars of high-quality Osram and Lumileds LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED has new and improved clip-on bars, making one person assembly a breeze.

iLink compatible: Designed to use with the DAYLIGHT Lighting Controller

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.

DAYLIGHT 480W LED PRO

DAYLIGHT 480W LED Grow Lights ensure growing with LED’s will impress even the most staunch HPS supporter.

Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED PRO, for growers looking for higher outputs and greater yields in a more compact and versatile unit. This fixture boldly bridges the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.

Don’t let the fact that these LEDs sit in the middle of our range fool you, the DAYLIGHT 480W LED PRO boasts a full spectrum of light with a fixture efficiency of 2.8 μmol/J and a total output of 1344 μmol/s. This is all made possible by 5 bars of high-quality Osram and LUMLED LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED PRO has new and improved clip-on bars, making one person assembly a breeze.

iLink compatible, for use with the DAYLIGHT Lighting Controller

The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.

This 100% UVA DAYLIGHT LED bar is a slim-line, stand-alone unit, which can also be installed as a supplemental light to an existing LED fixture. It will help to fine-tune the spectrum of any set up.

• Light Radiation: 20000mW
  
• Attach to DAYLIGHT LED lighting fixtures (480W/660W) or use independently
  
• 5000 hour lifespan
  
• Internal LED driver: Plug and Play
  
• Ideal as supplementary lighting
  
• IP65 Ingress Protection