5815 products
5815 products
Sort by:
The perfect Rooting Gel for the Organic Gardener from Cutting Edge!
At last, there is an organic rooting hormone solution for the gardener that that likes to keep everything organic and natural. Cutting Edge have released this Rooting Gel that contains only natural ingredients, assuring the grower that nothing synthetic has gone into their plants from start to finish.
Promotes rapid and vigorous root cell development
100% Organic
Harvested in a sustainable way
Help reduce stem rot
Strengthens the plant’s immune system
Pure natural extract from Eastern Atlantic Seaweed
Supplied in a convenient and easy-to-apply tube
Readily covers and sticks to plant tissue
How Cutting Edge Organic Rooting Gel Works:
When taking cuttings, a rooting hormone is invaluable for speeding up the rooting process and preventing rot before roots strike and become established. Until now it has been difficult for the Organic Gardener to find a non-synthetic natural rooting gel that doesn’t disrupt the 100% organic growing process. Now that’s all changed with the release of Cutting Edge’s 100% natural and Organic Rooting Gel. This product is made from seaweed which has been harvested from the Eastern Atlantic Ocean. It is cropped in a completely sustainable way which means that the natural harmony and balance of the ocean is not disturbed. The extract from the harvested seaweed contains natural hormones and anti-fungal properties which, when applied to the bottom inch or two of a freshly taken cutting, will greatly speed up the process of striking roots, and help it to resist stem-rot. It naturally helps to strengthen the cutting’s immune system meaning that it will stand the best chance of becoming a robust and well-developed plant.
How to use Cutting Edge Rooting Gel:
For best results, only choose healthy and thick-stemmed shoots from the mother plant to take a cutting from. Using a sterile and very sharp knife (preferably a brand new sterile scalpel) make a diagonal cut across the stem which is about half an inch to an inch from one of the “nodes” (the point on the stem where leaves come out from). Secondly, slice off the leaves where they join onto the main stem.
Next, coat a bottom couple of inches in the Cutting Edge Rooting Gel and place it into a rooting plug, Rooting plugs such as Jiffy peat-plugs, Rockwool plugs and flex mix plugs all work well. For Organic purposes, peat-plugs or flex mix plugs will help keep everything natural.
Ideally, keep the cutting(s) in a propagator and keep them lit with a cool-blue fluorescent light above it. Take the lid off and lightly mist the cuttings at least once, if not twice a day until roots have become established.
The Davin DV-M04 control panel is an expertly designed unit with 4 x 600 watt capacity, allowing for precise control of your mini-grow operation. With its scientific and objective approach, this panel provides accurate measurements and efficient functioning, resulting in optimal growth for your plants.
Davin DV-11 6 Amp Fan Speed Controller The Davin DV-11 fancontroller is designed to easily run an electrical motor at a desired speed. With the DV11 you can set the speed of your extractor or inlet fan, for example. The DV11 is protected by a 6 Amp thermal fuse. The thermal fuse ensures that the DV11 switches off with a short-circuit or overloading. The advantage of the thermal fuse is that when the problem has been fixed you only need to press the "reset" button and the DV11 starts working again. voltage 230V Max. power 6 Amp / 1350 Watt Thermal protection
Fan Controller DV11TII with thermostat (dual controllers) Fan Controller DV11TII with thermostat (dual controllers) By Davin fan controller, you have the ability to keep your optimal temperature control. The Davin DV11T II is a temperature sensors controlled fan system for both an inspirer and a hood, with a minimum and maximum speed. This control is controlled by temperature sensors can simultaneously control two machines. You can set the minimum and maximum speed for both machines. 2 x 6 amp
The Davin DV-11-T fan controller with thermostat is designed to keep the temperature in your greenhouse or any kind of room, under control. With the DV-11-T you set the desired temperature, and connect the extractor fan to it. You then set the minimum and maximum speed of your motor so it never runs faster or slower then desired. The thermal fuse ensures that the DV-11-T switches off with a short-circuit or overloading. The advantage of the thermal fuse is that when the problem has been fixed you only need to press the "reset" button and the DV11 starts working again.Voltage 230VThermostatMax. power 6 Amp / 1350 WattThermal protection
Davin DV12k 2x600w switch box inc. Heater Switch The DV-12K is a Grasslin timer controlled relay box with a maximum 2 x 600w fittings or 2 x 400w fittings can be switched. Next to this, the DV-12K has an outlet for a heater. • Dimensions in mm: 110 x 210 x 70 • Required voltage: 230 Vac/50Hz • Max output: 6amp • Output heater: 6amp • Isolation level: IP-44
Davin DV14k 4x600w Switch-Box inc. Heater Switch The DV-14K is a Grasslin timer controlled relay box with a maximum of 4 x 600w fittings, or 5 x 400w fittings can be switched. Next to this, the DV-14K has an outlet for a heater. • Dimensions in mm: 210 x 290 x 90 • Required voltage: 230 Vac/50Hz • Max output: 15amp • Output heater: 15amp • Isolation level: IP-44
