247 products
247 products
Sort by:
Maxibright Horizon Remote 315w lighting shade The Maxibright Horizon Reflector is part of the next generation of lighting designed to help you get the very best from your CDM light. Excellent build quality and rigorous testing as standard you can be sure your plants will lap up every last usable lumen.
Maxibright 315 Twin Reflector twin 315w lighting shade Maxibright Daylight Twin Reflector is designed specifically for 315W CDM/CMH lamps so that the arc tubes are positioned to ensure the most efficient spread of light over a 1.5 x 1.5m area. Dimensions (mm): 640 (L) x 440 (W) x 135 (H)
Maxibright Daylight V3 maximum light intensity Maxibright Daylight Single Reflector V3 has a 315W PGZ18 Lamp Holder included. This third generation Daylight reflector offers improved light coverage. Dimensions (mm): 490 (L) x 440 (W) x 220 (H)
Maxibright Daylight 315w Digital Ballast low frequency square-wave power pack The Daylight 315 digital power pack for horticultural lighting from Maxibright is compact, lightweight and silent running. With all the features of the Maxibright Digilight range, this stunning power pack precisely drives 315W CDM/CMH lamps. The Daylight 315 when used with the 315W CDM/CMH lamps ensures healthy abundant yields, excellent PAR output levels per watts of power consumed. • Specifically designed to run Maxibright & Philips 315W CDM/CMH lamps correctly • Low frequency square-wave power pack • Small, lightweight & silent running • Soft start technology • End of lamp life detection • Dynamic frequency control • Short circuit protection • Thermal protection
More useful light output to your plants with the same power input
Maxibright Daylight LED 1030W (2369) 2.3μmol/J
DAYLIGHT 1030W LED PRO
Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 1030W LED PRO. These fixtures boast a full spectrum of light with a fixture efficiency of 2.7 μmol/J and total output (PPF) of 2781 μmol/s
Featuring 10 x LED clip-on bars, and packed with all of the features of the datlight 660W LED PRO fixture, including remote dimming, iLink compatibility, high-efficiency diodes, and silent operation.
Overall fixture efficiency: 2.7 μmol/J
Total output: 2781 μmol/s
LUMLED white (2.85 μmol/J) and Osram red (3.8 μmol/J) chips: The best of the best.
10 bar system – Gives highly uniform coverage (PPFD) across the canopy. Ideal for areas up to 1.8m x 1.8m
Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.
Silent running: No fans or moving parts.
Remote dimmer included: 25%-50%-75%-100% power.
DAYLIGHT 200W LED
The Maxibright Daylight 200W LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.
Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 200W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.
DAYLIGHT 200W LED PRO
The DAYLIGHT 200W LED PRO is perfect for those looking for a powerful yet incredibly compact LED grow light. A direct upgrade on our original unit, the PRO features an impressive total output of 500 μmol/s. Boasting a range of new features including a remote dimmer, IP65 rating (meaning the environment in your grow room poses less threat to the lifespan), and DAYLIGHT Lighting Controller compatibility, giving you even more control over your grow room environment.
Designed to cover a 0.8 x 0.8m perfectly, coupled with the ability to dim the unit’s full spectrum light output, which includes Far-Red, makes the DAYLIGHT 200W PRO a highly applicable unit from propagation through to flowering.
With no fans or moving parts, silent operation, and little heat output you’ll get the absolute most out of the smallest of growing areas.
Product Dimensions: 508 x 508 x 86mm
DAYLIGHT 300W LED
The Maxibright Daylight 300w LED is a full spectrum output LED with a passive heat dissipation design. The “fanless” design means there are no mechanical parts, vastly reducing the risk of failure. This energy saving unit has a high photoelectric conversion efficiency which means that you save energy. The high photoelectric conversion efficiency means that you get more light per watt and less waste heat.
Benefiting from a well-rounded full spectrum and highly efficient LUMLED chips, the DAYLIGHT 300W LED makes for one of the most practical and affordable choices you can make when purchasing LED grow lights. Ensuring a full spectrum whilst maintaining an enhanced red region of the PAR curve gives a consistently high level of quality AND yield, every time you harvest.
DAYLIGHT 300W LED PRO
Introducing our latest addition to the DAYLIGHT LED range, the DAYLIGHT 300W LED PRO. These fixtures boast a full spectrum of light with a total output (PPF) of 750 μmol/s
This unit comes with IP65 rating as standard, meaning the environment within your grow room poses less threat to the lifespan of your light. Also having the ability to control multiple units via iLink cables or the DAYLIGHT Lighting Controller means you can tailor your lighting needs specifically to your plant, including Sunrise & Sunset settings. All this coupled with no fans or moving parts for silent operation, and very low heat output, makes the DAYLIGHT 300W PRO the most practical option for any small-scale grow room.
Total output (PPF): 750 μmol/s
Passive heat dissipation design (No need for internal cooling fans).
No LED covers: Clear glue diode protection for maximum output and efficiency
Full-spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.
Light distribution optimised for a 1 x 1m area.
Remote dimmer included: 25%-50%-75%-100% power.
DAYLIGHT 480W LED
Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED. These fixtures boldly bridge the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.
The DAYLIGHT 480W LED boasts a full spectrum of light with a fixture efficiency of 2.3 μmol/J and a total output of 1104 μmol/s. This is all made possible by 5 bars of high-quality Osram and Lumileds LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED has new and improved clip-on bars, making one person assembly a breeze.
iLink compatible: Designed to use with the DAYLIGHT Lighting Controller
The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.
DAYLIGHT 480W LED PRO
DAYLIGHT 480W LED Grow Lights ensure growing with LED’s will impress even the most staunch HPS supporter.
Introducing an exciting new addition to the DAYLIGHT LED range, the DAYLIGHT 480W LED PRO, for growers looking for higher outputs and greater yields in a more compact and versatile unit. This fixture boldly bridges the gap between the higher and lower powered units in the range, meaning they’re adaptable to a wide range of applications such as propagation, multi-layer gardening and grow tents/rooms. The ability to dim the fixture from 25% up to 100% power, means you can use it from the early stages of growth right through to flowering.
Don’t let the fact that these LEDs sit in the middle of our range fool you, the DAYLIGHT 480W LED PRO boasts a full spectrum of light with a fixture efficiency of 2.8 μmol/J and a total output of 1344 μmol/s. This is all made possible by 5 bars of high-quality Osram and LUMLED LED chips, covering a 1.2m x 1.2m area perfectly, with outstandingly uniform light coverage. All of this bundled up into a slimline and lightweight design. In addition to its new slimline design, the DAYLIGHT 480W LED PRO has new and improved clip-on bars, making one person assembly a breeze.
iLink compatible, for use with the DAYLIGHT Lighting Controller
The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.
DAYLIGHT 660W LED (2020)
Introducing our new and improved DAYLIGHT 660W LED lighting fixture. Our new 660W LED features the same outputs that made the original our most successful and popular unit; what sets it apart is the brand new design of the fixture and the host of new features that come along with it! With a PPF of 1518 μmol/s and a fixture efficiency of 2.3 μmol/J, you can expect the same exceptional quality of light and improved yield as the original. It’s 6 bars of high-efficiency Osram and Lumileds LED chips cover a 1.5m x 1.5m area perfectly, with outstandingly uniform light coverage. The new lightweight and slimline design improves on the already beautifully simple assembly of the original 660W LED fixture. New and improved clips to easily attach your bars make fumbling around in your grow room with bulky lighting a thing of the past!
The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit, means temperatures stay cool in your grow room regardless of the weather.
Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.
• Total output: 1518 μmol/s. Overall fixture efficiency: 2.3 μmol/J
• Lumileds white (2.6 μmol/J) and Osram red (3.15 μmol/J) chips: The best of the best.
• 6 bar system – Gives highly uniform coverage (PPFD) across the canopy. Ideal over a 1.5m x 1.5m area.
• Full spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.
• Silent running: No fans or moving parts.
Product Dimensions: 1119.6 x 1066 x 71.1mm
Introducing the DAYLIGHT 660W LED PRO, our ‘Flagship’ high output LED lighting fixture. With a blisteringly high total output (PPF) of 1848 μmol/s this unit pushes LED grow lighting to the next level. It’s 6 bars of high-efficiency Osram and LUMLED LED chips cover a 1.5m x 1.5m area perfectly, with outstandingly uniform light coverage. In addition to its new lightweight and slimline design, the 660W PRO has new and improved clip on bars making one person assembly a breeze.
iLink compatible, for use with the DAYLIGHT Lighting Controller
The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure. High-quality components and passive heat dissipation, teamed with the ability to dim this unit down to 25% power, means temperatures stay cool in your grow room regardless of the weather. Not only does the unit stay cool, but it now comes with IP65 ingress protection as standard, meaning the humidity from your grow poses no threat to the lifespan of your LED, which at 50,000 hours is an investment worth making, backed up by a four year warranty.
Extend standard LED power cable to 9m. For use with 660W and 480W LED Lighting Systems. (Excluding DAYLIGHT 660W LED (2019)).
DAYLIGHT 60W Far Red LED
This single 60W Far Red DAYLIGHT LED bar is a slim-line, stand-alone unit, which makes for an easy installation as a supplemental light to an existing LED fixture. With an efficiency of 2.3 μmol/J and a total output of 138 μmol/s, it will help to fine-tune the spectrum of any setup.
Overall fixture efficiency: 2.3 μmol/J
Total output: 138 μmol/s
Osram LED red chips
Attach to DAYLIGHT LED lighting fixtures (480W/660W) or use independently
Internal LED driver: Plug and Play
Ideal as supplementary lighting
IP65 Ingress Protection
DAYLIGHT LIGHTING CONTROLLER
Precise and versatile lighting control, right at your fingertips! The new DAYLIGHT Lighting Controller has been designed and manufactured to power your grow lights, whether you are using CMH or LED technology. Whether you want functionality like sunrise/sunset options, dimming on overheat or simply need to control the times of banks of lights with ease, this unit has you covered. Connected via the iLink ports, you can daisy chain multiple lighting fixtures together and control them all from the one unit, with the simple touch of a few buttons. Things couldn’t be made simpler for you!
• Two zones (A & B) controlled independently
• Control for 400 HID ballasts or 100 LED drivers
• Max HID ballasts per zone: 200
• Max LEDs per zone: 50
On/Off 24hr timer
Controls: DAYLIGHT iLink ballast for 315W CMH, 480W, 660W and 1030W LED
Dimming range (1% increments) LED – 20%-100% HID – 50%-100%
Sunset and sunrise settings: 0-30 mins
Temperature safety control
Thermostatically controlled dimming
